Module Recording Guide
Hello, dear friend!
SoVaPresent thanks you for your purchase!
Hello, dear friend! SoVaPresent thanks you for your purchase!
You now have a music module that's designed for custom recording. It's very simple-just follow these instructions.
You need to connect the module to your computer using a cable. Next to the cable port on the module, there is a switch button. Set it to the "ON" position. After doing this, your computer will recognize the module as a flash drive. You should see a drive labeled "E - SOVAPRESENT." These steps are applicable to Windows systems. If you have an Apple device, please use your own cable that will allow you to connect the module as a flash card.
To record your audio on the module, simply open the module's folder on your computer and drag the prepared audio file into it. This could be a favorite song, sound, poem, funny speech, or ideally, your own voice recorded on a voice recorder.
The file should be in MP3 format, with a maximum storage limit of 8 MB. The module contains files with my greeting message, which you should delete or move to another location on your computer to free up space for your files.
!!! DO NOT DELETE the configuration file named CONFIG !!!
You can program the module however you like: you may record one or multiple files, adjust playback settings, and set the desired volume.
All technical settings for configuring your module can be found in this instructions below.
If you lose it, just email us, and we'll send you a copy.
The total duration of your recorded files should not exceed 8 MB.
The module doesn't need batteries; you can charge it by connecting it to your computer.
While charging, a red light will indicate that it's charging. When fully charged, the indicator either turns off or turns green. A full charge takes about an hour. You can re-record on the module as many times as you like. If your computer doesn't recognize the module, try a different connection cable or ensure the cable is securely plugged in.
If you encounter any issues while recording on your module, email us at sovapresent@gmail.com, and we'll send you a video tutorial.
The module operates via a magnetic sensor, and playback depends on the mode you choose. In most cases, when the sensor touches the magnet, the recorded sound stops.
By the way, a magnet is included in the set— check near the speaker! ))
NOTE:
In the CONFIG file, there are two parameters:
1) VOL: It can be set from 1 to 30, based on your preference (with 30 being the loudest. Only change the number!).
2) IO: This setting controls how the sound plays (only change the number: 01, 02, or 03).
- IO=03: When the sensor touches the
magnet, the sound stops; when the sensor disconnects from the magnet, the sound plays again. If there are multiple sounds, they play one after another. (This is the most commonly used mode.)
- IO=02: The file is activated when the
sensor disconnects from the magnet and plays to the end, even if the sensor touches the magnet again. Each time the sensor disconnects from the magnet, a new file plays if there are multiple sounds.
- I0=01: The sound is activated when the sensor disconnects from the magnet.
Each new disconnection causes the sound to start from the beginning, or the next file plays if there are multiple sounds.
To edit your sound, voice, or to layer music over your voice, you can use various audio editors, such as Sound Forge Pro or any other similar software. You can also convert your sound to MP3 online, for example, at www.online-audio-converter.com.
If you need any help, you can always reach out to us at:
Email: sovapresent@gmail.com
Instagram: @sova.present
I wish you delightful moments with SoVaPresent!